Filo 5 Hinged Door
Linvisibile hinged system is the exclusive patented door, which is completely flush with the wall and reinterprets the traditional hinged opening; available in pull and push opening models. It is distinguished by the use of concealed hinges and the absence of door frames or jambs to achieve seamless continuity between wall and door.
It can be painted in the same finish as the walls, becoming almost invisible. Or the door structure can be left visible, with only the panel forming part of the design continuum and the panel finish.
It can be coated with almost any type of material (metal, stone, leather) to create special atmospheres, in a tasteful way. There are lacquered (glossy or matt) and wooden versions offered as well.
“Seamless continuity between wall and door”
Technical features and details
Linvisibile Filo 5 Hinged Door consists of:
– Extruded aluminium frame (EN AW 6060 alloy – Anticorodal 063) that replaces the frame (outer frame-posts) and adapts to walls and plasterboard walls with different thickness;
– A panel with hollow-core structure, 50 mm thick, made with a perimeter frame in solid wood (Bahia rosewood, toulipier or fir tree) with high-density honeycomb interior, finished with 2 MDF sheets, 5 mm thick, on each side. Class E1- low formaldehyde emission. Includes stop seals.
Dimensions and personalizations
Linvisibile Filo 5 Hinged Door is available in the following sizes (clear width):
*Standard dimension: width: 600; 700; 800 and 900 mm – height: 2100 mm
*Not standard dimension: width: from 500 to 1100 mm – height: from 1900 to 3500 mm (single leaf).
*Metal finishing dimension: all width from 600 to 1800 – all height from 1900 to 2700
*Moulded dimension: widths 900 mm x heights 2700 mm
It can be coated with wallpaper, trims, gobelin, decorative woods, decorations, skirting board and mirrors.
Technical details:
• It is possible to produce the frame without the header;
• It is possible to prearrange the panel for the introduction of a mirror or glass;
• It is possible to produce the panel for a greater resistance to humidity;
• The engagement of a straightener device (where foreseen);
• It is possible to apply a concealed door closure;
• It is possible to supply flush fitting handles (round or squared) or flush recessed handles.
Heat & sound insulation
The standard panel of the Linvisibile Filo 5 Hinged Door features a noise reduction of 18 dB certified by CSI.
There is an insulated version of the panel of the Linvisibile Filo 5 Hinged Door. It guarantees a noise reduction of 37 dB (certified by Lapi). This insulated version consists of a panel with an high performance material.

Private Residential, Apt | F House
MILAN, ITALY



Finish
As wall
Handle
Flush recessed “inverted T”


Private Residential, Nordic House
SKIEN, NORWAY



Finish
Matt lacquering
Handle
Traditional


Private Residential, Sanctuary House
TOPSHAM, UK



Finish
As wall
Surface
Decorative motifs

Handle
Traditional


Private Residential, Casa Cetara
AMALFI COAST, ITALY



Finish
As wall
Handle
Traditional


Residential renovation, Casa RR
Trento, Italy





Finish
as wall
Handle
Traditional

Shape
Single leaf




Private residential, Out of The Blue
Milan, Italy




The project “Out of the blue” consists of the restructuring of a 150mq detached house in Milan. From the very beginning , in agreement with the commitent , alongside the functional requirements, an architectonic language developed thus magnifying the intrinsic characteristics of the house and improving the perceived ratio between the different programmatic areas, creating a new balance and harmony. The entire fitted furniture was designed to belong to the architecture with the function of optimising the spaces and creating storage both in the living area and the large accessorised walls in the entrance. Photo @ Simone Furiosi
Studio AIM Architect
Federica Biasi Interior Designer
Product: Alba, Filo 5 Hinged Door
Year: 2016
Opening: Push left
Shape: Single leaf

Finish
As wall Matt Lacquer
Thickness
50mm

Handle
Traditional




Private residential, Residential renovation
Rome, Italy



A mix of rational architecture, art nouveau and modern style; this 100 sqm apartment situated on the sixth floor of a luminous Roman apartment, dates back to 1970.
The goal of this project designed by Arch. Alessandro Tomei in collaboration with THSC Studio is to achieve a comfortable house with livable space embellished with proportionate volumes. As the owner’s taste itself, the exposed naked elements and contrasts used in the design of the apartment reflect naturalness and simplicity. The spacious and minimal concept was created by using the visible axis to allocate the intended use destinations of the spaces which were defined by transparent or invisible separations.
The result is a refined apartment without including excessive ornaments. An up-to-date style without being subjected to the most fashionable stylistic ideologies.
Photo @ Alice Camandona
Alessandro Tomei Architect
https://www.instagram.com/alto81/
Product: Alba, Filo 5 Hinged Door
Year: 2015

Finish
as wall
Thickness
50mm

Opening

Shape



Private residential, Private Apartment Renovation
Turin, Italy




Private Apartment renovation of 213 sqm in Turin.
The project of the Architect Sergio Corsaro is characterised by a sober and elegant style with bright and solar colours. For the furnishings, the Architect choose the products Linvisibile Hinged doors and Vertical Pivot door that become “invisible to sight” by applying the same finish on the panel as on the wall and by applying the skirting board.
Sergio Corsaro Architect-Professional Office Architect
http://www.corsaroarchitettura.it
Product: Alba, Filo 5 Hinged Door
Year: 2013

Finish
as wall
Thickness
50mm

Handle
Traditional

Skirting
Continuity between panel and wall




Private residential, Elbphilharmonie Visitor Center
Hamburg, Germany




This mixed-use development involves three concert halls above a renovated brick warehouse, that includes a 2,150-seat main auditorium, a recital hall, a Hotel, restaurants, a public plaza and 45 luxury residences decorated by Amsterdam based Designer Kate Hume; the Italian studio Citterio-Viel & Partners developed the interior architecture project.
This project is set to become the German city’s top cultural and residential destination. The model apartment recently completed is located on the 18th level of the building; the design draws its inspiration from its context, with organic aesthetics, natural stone surfaces, curvaceous sofas and bespoke woodwork which demonstrates the designers approach to detailing and customisation.

Finish
Matt Lacquering
Thickness
50mm

Handle
Traditional

Opening
Push right




Luxury villa, Sylvie Legrand’s project
Hainaut, Belgium




Luxury villa at Hainaut in Belgium. A luxury villa featuring contrasting colors and special geometries. Glass and steel are the materials mostly used here which, combined with the color effects between walls and doors, create a unique and refined ambience. Hinged doors by Linvisibile, finished matching the walls, were used in all the doorways in this project. Most doors open to the monumental staircase lobby made of glass. Solutions approached to respect the volumes and walkways of the house.
Product: Alba, Filo 5 Hinged Door
Year: 2014
Surface: contrast colored geometries
Handle: traditional
Shape: Single leaf

Finish
As wall
Thickness
50mm

Opening
Pull left




Loft, living room
London, Uk


Finish
Matt lacquer
Surface
Moulded surface

Handle
Traditional

Boiserie
Moulded boiserie in continuity with the wall

Opening
Push right

Shape
Double leaves

Penthouse, living room
Moscow, Russia


Finish
"Natural" brass metal
Surface
Glossy

Handle
Traditional

Boiserie
Metal brass boiserie in continuity with the wall

Opening
Push right

Offices, relaxing room
Milan, Italy


Finish
Matt lacquer
Surface
Moulded surface

Handle
Traditional

Opening
Open left

Flat, kitchen
Florence, Italy


Finish
Ardesia stone
Boiserie
Stone in continuity with the wall

Opening
Push right

Flat, entrance
Rome, Italy



Finish
Palissandro wood essence
Surface
vertical vein

Boiserie
Palissandro boiserie in continuity with the wall

Opening
Push right


Luxury hotel, hallway
Treviso, Italy


Finish
as wall
Thickness
50mm

Boiserie
Boiserie in continuity between panel and wall

Opening
Push left

Finishes
Linvisibile reveal themselves with special colours, essences and finishes giving designers full freedom of combination. Make the most of our wide choice of colours, essences and materials for your surface finishes. And that’s not the end of the story, new materials (metals, leather, stone) and new processing methods (moulded) are now available on all Linvisibile overlay panels.














Linvisibile offers a wide variety of veneered woods which transform into concepts and trends. Classic or modern textures, simple or geometric, uniform or striped, with a horizontal or vertical vein, in a variety of beautiful tones, all come to life in projects implemented by architects and designers in such a way as to meet any kind of living-space requirements.
Surface shine, of metal. Amazing finishes that can be applied on all doors, available for the designer to give form to a space that reflects his/her imagination. Metal plates to choose between copper, brass and aluminium, of a variable thickness in function of the required finishing, applied to the facades oh the honeycomb panel by glueing in the press. The edge of the panel is provided lacquered as the metal surfaces. Available in matt ‘natural’ copper and brass, satin-polished aluminium… there’s virtually no limit to the variety of metal overlays on offer. For the most sought-after projects, Linvisibile proposes the partner De Castelli®, the Italian brand that represents the production of the most prestigious metals.
Linvisibile gets decked out with extra-thin natural stone slabs to clad the surfaces to enrich with vein-lines and under stones the panels of the entire Linvisibile door range. A new concept of door with a textured surface. Touch, feel, pass through. New sensory and poetic experiences are added to the technology offered by Linvisibile thanks to a reduced thickness, just 2 mm, and the chance to have stone covering the whole wall. Emistone®, a brand of the Pietravera s.r.l, is a collection of extra-thin natural stone slabs of different types and colours, laminated on a fiberglass and resin layer.
The lacquer is one of the most elegant forms of panel finishes. Precious surfaces, shining in every possible color to give the inhabited a tone of exclusive elegance. Lacquers by Linvisibile refer exclusively to RAL classic K5 sample book. Lacquered colours are compliant to matt/glossy effect requirements: Matt lacquered finish: 10 gloss Glossy lacquered finish: “100” gloss
The most innovative finishes. Leather is a natural product with very high durability and aesthetic characteristics. a prestigious choice to coat surfaces with original textures, to stand out with unique materials, prestigious and sophisticated. There’s no limit to the variety of leather overlays on offer. Brightness, strength, elegance, are just a few of the reasons why choose coat a door with leather. Linvisibile proposes Pinetti® leathers, synonymous of Made in Italy excellence in the production of natural leathers.
Excellent quality surfaces and exclusive refinement. Traditional and modern blend in higher quality woods, durable and prestigious. No material is able able to transmit heat as the wood essence. Only the wood essence gives environments unique atmospheres, grain and different levels of density. A product of great excellence, worked on sampling.
The finishes as the wall allows the most complete integration of the door in the wall. The doors become a single surface with the wall, creating a special effect of absolute continuity. The door disappears but it maintains a strong personality.
Elegant moulded panel with high level of accuracy on all door panels for rich and sumptuous decorations giving interiors a unique touch. Panel with hollow-core structure (honeycombe), made with a perimeter frame in solid wood finished with 2 mm MDF sheets on each side, where moulded panel works, to choose between the models quoted or on demand, after verification of feasibility.
Linvisibile enriches its product range with an innovative boiserie system, to decorate the walls in the same finishing as the doors. The exclusive “skin” system allows to coat, with only 3 mm of thickness, walls of any dimension in perfect planarity with the doors, for a total continuity effect.
The skirting board fixed flush to the wall represents an advanced frontier for decorating domestic spaces in an elegant and modern manner. Linvisibile has developed an exclusive skirting system to best complete its offer of flush with the wall elements. No element surmounts the wall which is then all perfectly flush. In fact, unlike traditional skirting boards the installed version with a flush surface runs the length of the wall with no protrusions. A thin line embedded in the wall that hides a great technology.
FENIX® is the new generation of smart materials (created by Arpa Industriale) for vertical and horizontal applications typical of interior design. Fenix®is a nanotech material which is not just beautiful to look at but comes with hi-tech, unique characteristics and is highly performant. Its manufacturing process makes the material anti-fingerprint, soft to the touch, matt and extremely resistant, so that it can withstand serious knocks, scratches, but also the attack by solvents and reagents typically used for household cleaning. It is also heat-resistant, water-repellent, hygienic, has enhanced anti-bacterial properties and it’s easy to clean.
The Slatted System is available in the Fenix® finish, to unite the beauty of a classic production with technology and high-performance, all contained in a material which is unique in itself in terms of its characteristics and performance. Fenix is a material which is anti-fingerprint, soft to the touch, matt and extremely resistant so that it can withstand serious knocks, scratches, but also the attack by solvents and reagents typically used for household cleaning. Strip height is 15 cm, with 1 mm beveled joint.
Linvisibile offers a wide variety of veneered woods which transform into concepts and trends. Classic or modern textures, simple or geometric, uniform or striped, with a horizontal or vertical vein, in a variety of beautiful tones, all come to life in projects implemented by architects and designers in such a way as to meet any kind of living-space requirements.
A prestigious finishing resulting from a unique technology, Alcantara®, is an absolutely cutting-edge material able to ensure a unique aesthetic appearance, technical, and sensory performance. This unique material also offers infinite possibilities for customisation. Thanks to these characteristics, Alcantara® is able to coat any shape and surface in compliance with the strictest standards in the industry.
Finishes
Wood Veneer
Linvisibile offers reconstitues wood in a huge variety of woods and patterns that are trasformed into vision and trend, where they come to life in project developed by architects and designers. Linvisibile is launching important partnership with the Italian leader in wood veneer production, ALPI, a prestigious Italian brand synonimous with prime quality, environmental friendlyness and a special focus on design elements.
Alpi is the best choice in terms of quality, product versatility and eco-efficiency.
All textures of available finishes may be viewed on the vendor’s website: www.alpiwood.com
These colour just provide a general idea of lacquered colours and essences but do not render them exactly.
Partner: ALPI

Metal
Surface shine, of metal. Amazing finishes that can be applied on all doors, available for the designer to give form to a space that reflects his/her imagination. Metal plates to choose between copper, brass and aluminium, of a variable thickness in function of the required finishing, applied to the facades oh the honeycombe panel by glueing in the press. The edge of the panel is provided lacquered as the metal surfaces.
Available: glossy or matt ‘natural’ copper and brass, satin-polished aluminium… there’s virtually no limit to the variety of metal overlays on offer.

Natural Stone
Linvisibile gets decked out with extra-thin natural stone slabs to clad the surfaces to enrich with vein-lines and under stones the panels of the entire Linvisibile door range. A new concept of door with a textured surface. Touch, feel, pass through. New sensory and poetic experiences are added to the technology offered by Linvisibile thanks to a reduced thickness, just 2 mm, and the chance to have stone covering the whole wall.
Emistone®, a brand of the Pietravera s.r.l, is a collection of extra-thin natural stone slabs of different types and colors and laminated on a fiberglass and resin layer. Stone is applied onto a substrate of matt fiberglass, textile or transparent resin film depending on the application. This product can be used not only for indoor or outdoor coatings but also for easily renovating any type of surface since it is very thin (2 mm), light (1.8 kg/sq.m) and easy to install.
Due to the extraordinary physicality of stone, its colors, streaks and shades, stone gives panels a unique beauty and a perfect result when stone slabs are applied as a continuation between door and walls.
The kinds of stone used are mica and slate. Due to their characteristics these two types of materials facilitate transferring one extra-thin layer of stone onto a base layer, which provides flexibility to stone and keeps the physical characteristics of stone unchanged as well as ensures architectonic effects of great impact.
Partner: EMISTONE

Lacquering
The lacquer is one of the most elegant forms of panel finishes. Precious surfaces, shining in every possible color to give the inhabited a tone of exclusive elegance. Lacquers by Linvisibile refer exclusively to RAL classic K5 sample book.
Lacquered colours are compliant to matt/glossy effect requirements:
Matt lacquered finish: 10 gloss
Glossy lacquered finish: “100” gloss

Leather
The most innovative finishes. Leather is a natural product with very high durability and aesthetic characteristics. a prestigious choice to coat surfaces with original textures, to stand out with unique materials, prestigious and sophisticated. There’s no limit to the variety of leather overlays on offer. Brightness, strength, elegance, are just a few of the reasons why choose coat a door with leather.

Wood Essence
Quality surfaces, exclusive of refinement. Traditional and modern blend in higher quality woods, durable and prestigious. No material is able able to transmit the heat as the wood essence. Only the wood essence gives environments unique atmospheres, grain and different levels of density.

As Wall
The finishes as the wall allows the most complete integration of the door in the wall. The doors becomes a single surface with the wall, creating a special effects of absolute continuity. The door disappears but it maintains a strong personality. The objective of hiding and masking passages in the wall is the fundamental concept of Linvisibile philosophy. Painting, plastering, decorating, any kind of finishing as the wall is allowed on Linvisibile’s products.

Moulded Panel
Elegant moulded panel with high level of accuracy on all door panels for rich and sumptuous decorations giving interiors a unique touch. Panel with hollow-core structure (honeycomb), made with a perimeter frame in solid wood finished with 2 mm MDF sheets on each side, where moulded panel works, to choose between the models quoted or on demand, after verification of feasibility.

Boiserie
Linvisibile extended its product range with an innovative boiserie system, to decorate the walls in the same finishing as the doors. The exclusive “skin” system allows to coat, with only 3 mm of thickness, walls of any dimension in perfect planarity with the doors, for a total continuity effect. The wall becomes a whole with the wall to furnish with elegance and refinement the environments in which we live. The boiserie can be made in several finishes: stone, metal, wood, glass, lacquer, leather, adapting itself with extreme delicacy to the finishing of the panels.

Skirting
The skirting board fixed flush to the wall represents an advanced frontier for decorating domestic spaces in an elegant and modern manner. Linvisibile has developed an exclusive skirting system to best complete its offer of flush with the wall elements. No element surmounts the wall which is then all perfectly flush. In fact, unlike traditional skirting boards the installed version with a flush surface runs the length of the wall with no protrusions. A thin line embedded in the wall that hides a great technology. This solution is in fact achieved by providing a recess for the skirting system and placing the appropriate profiles during the construction of the masonry, before the plastering and the floor laying. It’s a system that guarantees elegance, practicality and gives personality to the environment.
The system is made of an aluminium base profile to be anchored to the walls, including fittings for the door frames, and ready to accomodate standard finishes (glass, lacquering, metal, stone, wood, ceramic, etc.) or a specific Linvisibile® aluminium profile produced in lacquered or anodized finish to be pressure-applied to the base profile.

Laminate
FENIX® is the new generation of smart materials (created by Arpa Industriale) for vertical and horizontal applications typical of interior design. Fenix®is a nanotech material which is not just beautiful to look at but comes with hi-tech, unique characteristics and is highly performant. Its manufacturing process makes the material anti-fingerprint, soft to the touch, matt and extremely resistant, so that it can withstand serious knocks, scratches, but also the attack by solvents and reagents typically used for household cleaning. It is also heat-resistant, water-repellent, hygienic, has enhanced anti-bacterial properties and it’s easy to clean. The Fenix®surface, being solid, lends itself perfectly for moulding, which makes allows to draw decorations and motifs over the doors, reflecting the customer’s taste and requirements. Fenix® is available both in the NTM range – a material that above any other product responds to two interior design trends: the search for intelligent materials and the taste for extremely matt surfaces, and in the NTA range – a metal surface with all the main properties of Fenix®: scratch-resistant, anti-fingerprint, soft to the touch and super matt. Available in a wide variety of colours from the exclusive Fenix® collections

Slatted System in Laminate
The Slatted System is available in the Fenix® finish, to unite the beauty of a classic production with technology and high-performance, all contained in a material which is unique in itself in terms of its characteristics and performance. Fenix is a material which is anti-fingerprint, soft to the touch, matt and extremely resistant so that it can withstand serious knocks, scratches, but also the attack by solvents and reagents typically used for household cleaning. Strip height is 15 cm, with 1 mm beveled joint.

Slatted System in Wood Essence
The Slatted System is available in the wood version with 4 types of high quality wood: striped Walnut, natural Oak, black-tinted Oak, and Wengè-tinted Oak. It can also be produced on request in other natural wood veneers. An elegant finish that draws on its inspiration from the beauty of wood to furnish its surroundings in sophisticated style with its warm tones and interplay of its grain. Strip height is 15 cm, with 1 mm beveled joint.

Alcantara®
A prestigious finishing resulting from a unique technology, Alcantara®, is an absolutely cutting-edge material able to ensure a unique aesthetic appearance, technical, and sensory performance. This unique material also offers infinite possibilities for customisation.
Thanks to these characteristics, Alcantara® is able to coat any shape and surface in compliance with the strictest standards in the industry. A material that embellishes the panels, providing an extraordinary tactile experience. Elegant and refined, light, resistant, and durable, Alcantara® embodies the new paradigm of the contemporary lifestyle for those who are looking beyond functionality, even the emotion of beauty, in
respect for ethics and the environment.

Accessories
Invisible flush fitting handle
The panel is provide with the exclusive invisible flush fitting handle, that can be combined with the roller latch lock. Available in white lacquered finishing RAL 9016 or matt chrome neutral type.

Flush fitting handle Inverted T
Linvisibile has developed new solutions of flush fiiting handle. They are directly milled on the panel and are to be directly used as pulling handles without adding other accessories. The “Inverted T” handle, with 70-mm entry, can be made on the hinged doors combined with the roller latch lock or flush door handle. An elegant handle that enhances the panel with its clean and subdued look for those looking for a new and original way to interpret the handle.

Round flush-fitting handle
Round flush fitting handles perfectly flush with the wall available on request, combined with roller latch lock. Panel is arranged to install the flush fitting handle.

Square flush-fitting handle
Square flush fitting handles perfectly flush with the wall available on request, combined with roller latch lock . Panel is arranged to install the flush fitting handle.

Concealed door closer
Linvisibile has enriched its already wide range of accessories by introducing a new closing device for hinged doors flush door closer. This is a spring closing mechanism with return arm that can be combined with both Push and Pull models.
The concealed door closer is completely invisible; when the door is open, the thin arm has a discrete and elegant impact when the door is open. The system allows a lineal and silent closing movement with the chance of adjusting the return speed and guaranteeing excellent closure. This mechanism allows for the automatic closing of the panel and can also be used as an opening stop (90°).
The flat door closer can have a wide range of applications and as it is highly versatile, it can provide innovative solutions of total invisibility, mainly the Push model.
The system can be used (for universal base layer, lacquer, veneered wood, stone finishes) with sizes up to 1100 x 3000 mm H:
The concealed door closer can be perfectly used without lock, an especially efficient solution from the aesthetic point of view (push door model): the effect of total invisibility of the door into the wall is obtained as the system has no lock or handle.
The concealed door closer can also be combined with the following locks: B-Two Magnetic lock, SL Safety lock and Opera Hotel SL Lock with electrical strike.
Is by the customer evaluation the possible presence of currents and / overpressure air on site that could compromise the re-closing of the panels and the arrangement of walls for the installation of heavy weight panels.

External concealed door closer
The external door closer is mandatory for acoustic version – 37 db. Discrete and elegant, the system allows a linear and silent closing movement with the chance of adjusting the return speed, the guaranteeing of an excellent closure, a stop function. In push version, there is the possibility of an application without any lock, for a result of absolute invisibility.

Standard hinges
The highly-functional materials used to make the hinge structure (Anselmi) are chosen to suit the application and make leaf motion easy even if leaves are heavy, since all tear and wear effects are minimized. These hinges can be adjusted on three axes.

Hinges Simonswerk
In special cases Linvisibile Hinged door is equipped with concealed hinges of renowned brand Simonswerk, model TE340 3D. Concealed hinges: invisible hinges totally disappearing, for doors with aluminum frame. UL certification, 160 kg capacity, 180 ° opening, front length 240 mm . Comply to DIN, sliding bearing functioning. Adjustable hinge on three axes. Standard finish satin chrome, other finishes on demand. All features on the manufacturer’s site www.simonserk.it

Locks
B-Twin Magnetic lock (Bonaiti)
This is the standard lock on Hinged door, a highly functional magnetic lock with high aesthetic value that combines fluidity and noiseless operation. Strong and precise, this lock operates by means of magnets when closing, and mechanically when opening, with concealed spring latch in line with the handle box. The B-Twin Magnetic Lock (Bonaiti)is the ideal solution to fully protect the profile against latch abrasion. The absence of visible parts at the front makes this closing system a furniture element that is both an integral part of the door and in harmony with it.
The original lock is personalised with the Linvisibile brand! Available also in “single hole” (latch hole) and “cylinder aperture” (Yale) models; this lock can be combined with the flush door handle. Finishes available: satin chrome, polished brass.

Mediana Revolution lock (Agb)
The Mediana Revolution lock is the new lock available for the Hinged door with the possibility of 50 or 70-mm entry handle hole. The 70-mm entry allows the handle to be positioned more toward the center of the panel to provide better grip and make it more attractive on the panel. Available in the versions with key, latch hole and cylinder, and with electrical strike plate.

Roller latch lock (Welca)
Locks available on request on Hinged doors. The Welka lock has a teflon roller to reduce abrasion on the aluminium frame. This lock guarantees optimum function, extremely contained noise level, and does not require the hole for handle. It does not allow for a safety closure. Finishes: polished chrome.

Safety lock SL (Agb)
Safety SL Lock (AGB) – with electrical strike – entry 50 is available on request on Hinged doors. With spring lock and bolt, it is ideal to obtain a high level of safety. This lock uses European profile cylinders series 600, the body and front part are in stainless steel. Thanks to the spring latch with reversible lever in sintered steel, this lock ensures maximum closure with the Flush Door Handle.
A key system can be fitted but it is not mandatory. It is also equipped with a safety device that prevents forcing the latch using any kind of cards, for instance, credit cards. It is also available in the “mechanical” model: highly safe traditional lock. Finishes: polished chrome, polished brass.

Opera Hotel SL lock (Agb)
Opera Hotel SL Lock- entry 50 available on request on Hinged doors. Opera Hotel SL is an embedded lock with panic exit function: by lowering the handle, the bolt and the spring latch are released. Recommended for hotels and public places; it bears the EC marking. It uses specific cylinders and has a panic exit mechanism. Thanks to the latch with reversible lever in sintered steel, this lock ensures maximum closure with the Flush Door Handle. A key system is mandatory.
The system coding allows for differentiating the customer’s key from those keys belonging to the manager or service staff. Available in the mechanical version and with electrical strike plate. Finishes: satin chrome, polished brass.

B-Noha lock (Bonaiti)
Magnetic lock B-Noha is a flush to panel pressure drive. Available only for handle hole

Technology
Technology
Thanks to a refined technology, Linvisibile system guarantees perfect continuity between door and wall, a fully concealed aluminium structure, and elimination of unsightly cracks. Linvisibile ensures perfect planarity between wall and panel and an exclusive perimeter millimetric gap. For all its products, Linvisibile offers an exclusive 10-year warranty for the aluminium frames and a 2-year warranty for the panels. All Linvisibile brand products are made entirely in Italy, with particular attention to design and all materials used during the manufacturing process.
